Problem med TC Electronics PolyTune

[AddiToll]

Heisann,

når jeg skal starte opp min PolyTune, fungerer den ikke. Det kommer plutselig opp alle funksjonene også slår den seg av igjen. Noen som har en anelse om hva dette kan være?

[Loztboy]

Har du forsøkt å installere siste firmware?

[Carpal67]

Question

The software update didn't work and now my PolyTune won't start anymore. What should I do?

Answer

Most importantly: don't worry, your pedal is not broken! It is still in boot mode and uploading the software to it should fix it.

Prior to releasing the Drop-D software update, the procedure was extensively tested, and the below three suggestions will fix this issue:

1. First, simply try uploading the software to the pedal again.
   
2. If it fails, please check that the PolyTune USB driver has been installed correctly (with pedal NOT connected to the computer) prior to uploading the software.
   
3. If it fails again, please try uploading the software on a different computer, after installing the PolyTune USB driver.
   

Please observe: when the pedal is in bootmode, it won't show any LED activity when uploading the software until the update is completed!

Software: http://www.tcelectronic.com/media/polytune-software-win-2-1.zip

How to: http://www.tcelectronic.com/media/polytune-software-update-windows-7.pdf

Endret Juni 16, 2012 av Carpal67

[+The Euphor]

Avanserte greier, stemmegafler med firmware.

[Carpal67]

Jepp, jeg hacket min så den har fått en helt ny funksjon.

Endret Juni 16, 2012 av Carpal67

[Loztboy]

Hvaslags funksjon? Mutebrick

[Carpal67]

Pusseklosse.....